TBI-PUSH-4
DALI PUSH BUTTON COUPLER
The push button coupler is a module with 4 contact
inputs for regular push buttons and switches. It
communicates and it is powered from the DALI channel.
Its small size allows it to be installed behind standard
wall switches and push buttons.
Four digital inputs
There are 4 digital inputs (dry contact) designed for conventional pushbuttons or switches. These inputs facilitate seamless integration with standard pushbutton or switch controls.
Mutil-master
Mutil-master, up to 32 per DALI channel.
DALI Bus Powered
Powered directly from the DALI channel. This ensures efficient integration and operation without the need for additional power sources.
DALI-2 Support
Can integrate up to 32 DALI-2 input devices (control devices) per DALI channel. Light sensors, occupancy sensors and buttons can be configured via the web interface and made accessible to BACnet.
Compact design
Designed for optimal mounting behind standard switches.
Integrated Wires
Built-in wires for connecting the push button and switches.
Commands
Via the DALION lighting controller, the connected push
buttons and switches can control luminaries on the DALI
channel. The DALION allows for the following
commands and more:
✓ Off, On
✓ Dim Up and Down
✓ Direct Value
✓ Recall Scenes 1-16
✓ Last On Level
✓ Occupancy
✓ Daylight Harvesting
✓ Demand Response
DALI Wiring
The bus wiring must be connected in a star topology, a linear topology, or a mixture of the two. Wiring must not be carried out in a ring structure. The two wires that serve as the bus must be located in the same cable or cable conduit. In the cable or cable conduit, the two wires must be side by side to avoid unintentional coupling to other signals.
| Model |
TBI-PBCD-4 |
| Power supply |
Powered from the DALI
channel, current: 3 mA. |
| Input |
4 digital inputs (dry contact) |
| Dimension |
45 x 20 x 10 mm, 1.80″ x
0.80″ x 0.42″ (L x W x H) |
| Fixation |
Wiring and can be installed
behind standard wall
switches and push buttons. |
| Wiring |
0.2 – 0.5 mm², Stripping length: 6 mm |
| Enclosure material |
UL 94 V-0 |
| Operating temperature |
0 °C to 45 °C (32 °F to 113 °F) |
| Standards |
Input devices – Push buttons – 301 – IEC 62386-301 |
| Model Number |
Model Description |
| TBI-PBCD-4 |
DALI Push Button Coupler |
Need additional information about DALI PUSH BUTTON COUPLER?
