Skip to content
DALI

What is a DALI gateway?

A DALI gateway connects DALI lighting to building management, automation and lighting control systems. Learn the main types of DALI gateways and how to choose one.

Key Takeaways

  • A DALI gateway connects a DALI lighting bus to another system, such as a building management system (BMS), a PLC, a KNX installation or a lighting console.
  • The main types are BACnet, Modbus, KNX, DMX (sACN / Art-Net) and IP or cloud gateways. Choose the type that matches the system that will control the lighting.
  • Before choosing, check the number of DALI channels, DALI-2 support, local control features, certifications and commissioning tools.
  • Some products, such as DALION, combine several protocols and a lighting application controller in one device.

What is a DALI gateway?

DALI (Digital Addressable Lighting Interface, IEC 62386) is a two-wire digital bus for lighting. Each DALI bus can address up to 64 control gear, such as LED drivers, and with DALI-2 up to 64 control devices, such as sensors and push buttons. DALI is designed for lighting only: it runs at 1200 bit/s and does not use Ethernet, so it cannot talk directly to a building management system or to other building networks.

A DALI gateway sits between the DALI bus and another network. It translates commands and status in both directions: the other system can switch and dim lamps, recall scenes and read lamp failures, while the gateway handles DALI addressing and bus timing.

Many DALI gateways are also DALI application controllers. They discover and commission the devices on the bus, and they can run lighting logic on their own.

Types of DALI gateways

BACnet DALI gateway

A BACnet DALI gateway exposes DALI channels, groups, lamps and scenes as standard BACnet objects, so the building management system can monitor and control lighting alongside HVAC and other building services. It is the usual choice in commercial buildings that already use a BACnet BMS. Look for BTL listing, which shows that the device passed BACnet Testing Laboratories interoperability testing.

Modbus DALI gateway

A Modbus DALI gateway maps DALI levels, scenes and status to Modbus registers. It suits PLCs, SCADA and energy management systems. Modbus TCP runs over Ethernet, while Modbus RTU uses RS-485 serial wiring. Learn more in Modbus DALI gateway: controlling DALI lighting with Modbus TCP.

KNX DALI gateway

A KNX DALI gateway links DALI lighting to a KNX installation through KNX group addresses. KNX is common in European commercial and residential buildings, and KNX DALI gateways are configured with the ETS software.

DMX512, sACN and Art-Net DALI gateways

These gateways let lighting consoles and media servers control DALI fixtures. DMX512 is the standard for entertainment and architectural lighting, and sACN (E1.31) and Art-Net carry DMX data over IP networks. They are used for façades, hospitality, retail and venues that combine show lighting with general lighting.

IP, REST API and cloud DALI gateways

Some DALI gateways provide an HTTP or REST API, MQTT or a cloud connection, so custom software, dashboards and IoT platforms can control DALI lighting directly.

Gateway or lighting controller?

A basic gateway only translates commands, so all the logic, such as schedules, occupancy and daylight control, has to run in the BMS. A lighting application controller with a built-in gateway runs that logic locally: lighting keeps working on its own, and the BMS supervises and overrides it when needed. For most buildings, local control combined with BMS integration gives better reliability and simpler commissioning.

How to choose a DALI gateway

Question What to check
Which system will control the lighting? BACnet, Modbus, KNX, DMX or an API. Some gateways support several protocols.
How many DALI devices? The number of DALI channels and the devices supported per channel (up to 64 control gear per DALI bus).
Sensors and push buttons? Support for DALI-2 input devices such as occupancy sensors, light sensors and push buttons.
Local control? Room control, schedules, daylight harvesting and scenes inside the gateway.
Certifications? BTL listing for BACnet, and DALI-2 certification for DALI devices.
Colour control? DT8 support for tunable white and colour.
Commissioning? A web interface or software for addressing, grouping and testing.
Installation? Ethernet ports, DIN-rail mounting, and whether a separate DALI bus power supply is required.

DALION: a multi-protocol DALI gateway

BACMOVE DALION is a BACnet DALI gateway and lighting application controller in one DIN-rail device. It connects one (DALION-1) or four (DALION-4) DALI channels to:

  • BACnet/IP (BTL Listed)
  • Modbus TCP
  • DMX512 over sACN (E1.31) and Art-Net
  • HTTP and a REST API

Each DALI channel supports 64 DALI lamps and 32 DALI-2 input devices. DALION runs room light control, daylight harvesting, schedules and scenes locally, and includes a web interface for commissioning. DALION does not support KNX: for a KNX installation, use a KNX DALI gateway.

Explore DALION or contact us to discuss your project.

Connect with our experts

Questions about our products, a project quote, or technical support? Our team is here to help.

Contact us

Newsletter

Stay updated with the latest news and product updates.

Subscribe to Newsletter